| Quick Installation Instructions
1) cd /tmp
2) tar -xpvf /cdrom/cdromo/zfd3.1.tar
3) cp zfd zfd.conf /kernel/drv
4) cp /etc/devblink.tab /etc/devlink.tab.ORIG (appending
to the end)
5) cat devlink.tab>> /etc/devlink.tab (appending
to the end)
6) add_drv zfd
7) reboot -r
Orion 18 firmware upgrade
HiFLASH installation files:
Firmware Upgrade Instructions PDF
Z Microsystems strongly recommends using Acrobat
5 Reader for viewing the above file as the Acrobat 4 Reader has
a bug that may freeze/crash IE browsers.
disk1.zip
disk2.zip
disk3.zip
TPA 02-0101
Replacing the Z MPU SCM Rear Bezel:
Z Microsystems recommends you read the instructions in the following
document before proceeding with the Installation Procedure. The following
is the Adobe Acrobat .pdf of the Rear Bezel Installation Procedure:
Rear_Bezel_Installation_Procedure.pdf
Workaround for Z MPU SCM/Rear Bezel Misalignment:
If you have not yet received your Bezel Installation Kit in the mail,
this workaround will help to modify the alignment temporarily. Z Microsystems
recommends you read the document carefully before proceeding with the
workaround. The following is the Adobe Acrobat .pdf of the SCM/Rear
Bezel Misalignment Workaround:
SCM_Rear_Bezel_workaround.pdf
TPA 02-0102
Mapping Z MPU USB CD-ROM drive on Windows 2000:
Z Microsystems recommends you ensure the Service Pack 4 Rollup 1 is
installed on your system before installing the Z Microsystems' Z MPU
upgrade. To download the Windows Service Pack, click
here .
Once the Windows 2000 Service Pack is installed, click on the following
file to download the Z Microsystems' Z MPU upgrade:
ZMPUUpgrade.exe
Restricted Access Software
|
