RAID Controller

RAID Operation

Controls and Indicators

Management Software

• 400 MHz RISC Processor with 256KB embedded L2 cache
• ASIC 133 with XOR engine and ECC inside
• Standard 512MB / 1GB cache memory in one SDRAM
• LCD controller panel interface
• System fan speed, voltage and temperature self-monitoring
• One RS-232C DB9 serial port for text mode management
• One 10/100 MBsec Ethernet port
• 32 KB NVRAM with Real Time Clock
• Beeper
• Drives: up to 8X U320 SCSI
• Hosts: 2X U320 SCSI
• RAID levels: 0,1,0+1,3,5,10,30,50, NRAID, JBOD
• Multiple RAID selection
• Hot-spare drive operation
• Drive hot-swapping
• Automatic background rebuild
• Online drive expansion
• Intelligent drive handling
• Front LCD control panel for setup and configuration
• LED indicators for power, battery, controller, and other system operation status
• Component failure indication through LCD, RS-232C and GUI
• Built-in beeper/alarm mute button
• System monitoring via out-of-band Ethernet
• RAIDWatch™ manager software for all major platforms via an Ethernet port
• Firmware embedded manager via RS-232C, platform independent

51 lbs. (with eight TP7 @ 2.5 lbs. each)

-Two 68 pin for drive channels, four 68 pin for host channels (each host channel uses two connectors for daisy chaining the SCSI bus).

-One RS-232C DB9 serial port

-One RJ45 Ethernet port